對燃氣輪機發電設備進行故障排查時，需要注意以下幾個重點。

　　When troubleshooting gas turbine power generation equipment, the following key points should be noted.

　?。?）需要及時處理振動問題

　　(1) Need to promptly address vibration issues

　　在設備運行過程中，振動方面的問題需要引起從業人員的關注。通過振動顯示儀對燃氣輪機發電設備中可能會產生的振動點進行檢測。在檢測過程中，如果發現異常情況，要及時停止設備運行，避免設備在超負荷的情況下運行，導致軸承等出現損傷。在對振動的情況進行分析時，主要針對燃氣輪機發電設備的結構進行排查。同時，為了盡量減少振動情況的發生，要定期清理葉片中的雜物等。

　　During the operation of the equipment, vibration issues need to be of concern to practitioners. Detect possible vibration points in gas turbine power generation equipment through a vibration display instrument. During the detection process, if any abnormal situation is found, the equipment should be stopped in a timely manner to avoid running under overload conditions, which may cause damage to bearings and other components. When analyzing the vibration situation, the main focus is on investigating the structure of gas turbine power generation equipment. At the same time, in order to minimize the occurrence of vibration, it is necessary to regularly clean the debris in the blades.

　?。?）需要維護熱通道

　　(2) Need to maintain hot aisle

　　在設備運行過程中，從業人員要做好相應的監控和管理工作，如果設備在運行的過程中性能發生了改變，需要及時對設備的火焰管等位置進行檢查，平時還需要注意燃氣輪機發電設備的清洗工作，避免設備結垢情況。

　　During the operation of the equipment, practitioners should carry out corresponding monitoring and management work. If the performance of the equipment changes during operation, it is necessary to inspect the flame tube and other positions of the equipment in a timely manner. In addition, attention should be paid to the cleaning of gas turbine power generation equipment to avoid equipment scaling.

　　（3）需要定期更換過濾器

　　(3) Regular replacement of filters is required

　　設備在運行過程中，對進氣的濃度及顆粒物的大小等都有一定的規定，進氣過濾器負責對進氣進行過濾。如果過濾器的指標沒有達到相關的要求，那么設備中的壓氣葉片以及軸承等也很容易出現異常的情況?；诖?，應建立現代化的監管系統，幫助從業人員更為及時地發現設備運行中的各類異常情況。

　　During the operation of the equipment, there are certain regulations on the concentration and particle size of the intake air, and the intake filter is responsible for filtering the intake air. If the indicators of the filter do not meet the relevant requirements, the pressure blades and bearings in the equipment are also prone to abnormal situations. Based on this, a modern regulatory system should be established to help practitioners discover various abnormal situations during equipment operation in a more timely manner.

　　本文由  燃氣發電機組 友情奉獻.更多有關的知識請點擊  http://www.pyucoin.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from a gas generator set For more related knowledge, please click http://www.pyucoin.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.