1. The gas pipeline shall be made of steel pipe, the pipe wall shall not be too thin, and the joint shall be sealed reliably. After the gas pipeline connection is completed, the gas detector or soapy water shall be used to detect the pipeline leakage, especially the joints of flange and valve.

2、應定期檢查燃氣發電機組的閥門，應無燃氣泄漏、損壞等現象，閥門周圍應無妨礙閥門操作的堆積物，閥門應定期進行啟閉操作和維護保養，無法啟閉或關閉不嚴的閥門，應及時維修或更換。

2. The valve of gas generator set shall be inspected regularly, and there shall be no gas leakage, damage and other phenomena. There shall be no accumulation around the valve which hinders the valve operation. The valve shall be opened and closed regularly and maintained. If the valve cannot be opened or closed tightly, it shall be repaired or replaced in time.

3、燃氣管線上的膠管應定期更換，嚴禁使用過期老化膠管。

3. The rubber hose on the gas pipeline should be replaced regularly, and it is forbidden to use the expired aged hose.

4、對燃氣發電機組及燃氣管線進行運行、維護和搶修時，必須可靠地切斷燃氣來源并將內部燃氣排凈，未查明事故原因和采取必要安全措施前，不得向燃氣設施恢復送氣。進行維護檢修時，應采取防爆措施或使用防爆工具，嚴禁用鐵器等工具進行敲擊作業。

4. During the operation, maintenance and emergency repair of gas generator set and gas pipeline, the gas source must be reliably cut off and the internal gas shall be drained. Gas supply to gas facilities shall not be resumed until the cause of the accident is found out and necessary safety measures are taken. During maintenance and repair, explosion-proof measures or explosion-proof tools shall be used. It is forbidden to knock with iron tools.

5、燃氣泄漏的搶修應在切斷氣源后進行，當泄漏處已發生燃燒時，應先采取措施控制火勢后再切斷氣源，嚴禁管道內出現負壓。

5. The emergency repair of gas leakage should be carried out after cutting off the gas source. When the leakage has been burned, measures should be taken to control the fire and then cut off the gas source. Negative pressure in the pipeline is strictly prohibited.

以上的內容就是燃氣發電機組為大家介紹的今日內容，更多內容還請大家關注網站：http://www.pyucoin.com我們會定期更新新的知識與內容為大家呈現.

The above content is the content of today introduced by gas generator set. For more information, please pay attention to the website: http://www.pyucoin.com We will regularly update new knowledge and content for you to present